How to Set Up Warehouse Locations and Bin Codes
Warehouse location bin codes are how stock becomes findable. Without a naming convention, your WMS can only report totals while people still hunt by memory. With a clear scheme, putaway, picks, Transfers, and Stock counts all point to the same address.
This guide gives a practical convention and a worked aisle/bay/bin example in the A-03-B-02 style. It assumes you already know why a WMS cares about location. If not, read what is a warehouse management system first.
Principles before letters and numbers
Good codes are short, speakable, and unique. They should sort sensibly on a pick list and survive a shouted instruction across an aisle. Avoid embedding product names in the location code. The bin is an address. The SKU is what lives there today and may move tomorrow.
Decide hierarchy once, then stick to it. A common warehouse pattern is:
- Aisle (or zone): letter or short code for the walk path
- Bay (or rack section): number along that aisle
- Level: letter or number for shelf height
- Bin (or position): number for the slot on that level
Write the hierarchy left to right from large to small. People scan and read in that order when they walk.
Recommended naming convention
Use a single delimiter, such as a hyphen, and fixed width numbers so sorting stays tidy. Example pattern:
Aisle-Bay-Level-Bin → A-03-B-02
- A: aisle A
- 03: third bay, zero-padded so 03 sorts before 10
- B: second level up (A floor or lowest, B next, and so on)
- 02: second bin position on that level
Keep letters for dimensions that are few and stable (aisles, levels). Keep numbers for sequences that grow (bays, bins). Do not mix “A3B2”, “A-3-B-2”, and “AisleA Bay3” in the same building. One grammar only.
Print human-readable text under every barcode or QR so a failed scan still leaves a usable address. If you use GS1-style 1D barcodes on labels, their general distribution guidance is a useful standards backdrop: GS1 1D barcodes for general distribution.
Worked example: Apex flooring into A-03-B-02
Supplier Apex delivers 40 packs of FLR-120. After you Receive stock, putaway needs a home.
- Operator walks aisle A.
- Stops at bay 03, confirmed by the rack end label.
- Places packs on level B (second shelf).
- Uses bin 02 on that shelf, scans the location label, confirms quantity.
On the system, FLR-120 now lives at A-03-B-02. Later, a pick for 12 packs sends the operator to the same code. Scan to deduct reduces the bin balance only when both product and location rules are satisfied. If you use Closed QR codes on product labels, the scan path stays controlled even when neighbouring bays hold similar packs.
When you cycle-count, you count A-03-B-02, not “flooring somewhere in A”. That is how Stock counts stay auditable.
Storage sites in VORQ
Locations sit inside sites. VORQ models buildings, yards, or van holds as Storage sites. Each site has its own location map. Aisle A in the main warehouse is not the same as aisle A in the secondary shed, even if both use the A-03-B-02 grammar.
When stock must move between sites, use Transfers rather than editing two balances by hand. The location code still matters at each end: ship from A-03-B-02 at Site Main into a staged inbound location at Site East, then put away into that site’s own bin map.
Low stock alerts and Purchase orders become more useful once every unit has a site and a bin. Replenishment can target the site that is actually short.
Layout tips that keep codes honest
- Label both ends of long aisles so people do not walk the wrong way to “A”.
- Reserve a receiving staging zone with its own codes (for example RCV-01) so dock stock is not invisible.
- Do not reuse a bin code for a different physical slot after a remodel without closing stock first.
- Keep heavy or bulk items on lower levels for safety as well as speed. HSE’s warehouse guidance is worth a pass when you redesign: HSE warehouse keep it safe.
Rollout sequence
- Draw the site on one page and mark aisles.
- Agree the hierarchy and padding rules with the whole team.
- Print and fix location labels before you migrate balances.
- Move a pilot zone live, run Receive stock and picks there for a week.
- Expand aisle by aisle. Avoid a big-bang relabel of the entire building on a Friday.
Common naming mistakes
- Encoding the supplier or product in the bin code, then freezing obsolete names into the map.
- Using spaces or mixed separators so “A 03 B 02” and “A-03-B-02” both appear in history.
- Skipping zero-padding, which makes bay 10 sort before bay 2 on many lists.
- Creating orphan locations in software with no physical label, then wondering why counts drift.
- Letting temporary floor stacks sit outside any code until “we are quieter next week”.
Fix mistakes early. Renaming after six months of movement history is possible, but painful. Prefer a short pilot aisle, prove the grammar, then scale.
For buying context around location depth, see how to choose warehouse inventory software for a small team. For how locations interact with system type, see WMS vs inventory management software. Receiving habits that feed putaway are covered in warehouse receiving SOP.
Next step
Set the convention, label one aisle, and make every new receipt land in a real bin. VORQ Storage sites and location tracking are built for that discipline. Review how it works, check pricing, or sign up when you are ready to replace informal piles with addresses your scanners trust.
